OID Repository
OID Repository
Display OID:
iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1)  

child OIDs:  g9982Objects(1)  g9982Conformance(2)
separation line
OID description

OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)


LAST-UPDATED "201302200000Z" -- 20 February 2013
"WG charter:

Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address

Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.
Petach-Tikva 4951169
Phone: +972-3-926-8421
EMail: menachemdodge1@gmail.com

Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 49103
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com

Editor: Moti Morgenstern
Postal: ECI Telecom
30 Hasivim St.
Petach-Tikva 4951169
Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com"
"The objects in this MIB module are used to manage the
Ethernet-based multi-pair bonded xDSL interfaces, as defined in
ITU-T Recommendation G.998.2 (G.Bond/Ethernet).

This MIB module MUST be used in conjunction with the GBOND-MIB
module, common to all G.Bond technologies.

The following references are used throughout this MIB module:

[G.998.2] refers to:
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005.

[G.998.2-Amd2] refers to:
ITU-T Recommendation G.998.2 Amendment 2, December 2007.

[802.3] refers to:
IEEE Std 802.3-2005: 'IEEE Standard for Information
technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks -
Specific requirements -

Part 3: Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Physical Layer
Specifications', December 2005.

[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.

Naming Conventions:
BACP - Bonding Aggregation Control Protocol
BCE - Bonding Channel Entity
BTU - Bonding Terminating Unit
BTU-C - Bonding Terminating Unit, CO side
BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sub-layer
HDLC - High-level Data Link Control
PTM-TC - Packet Transfer Mode Transmission Convergence
SNR - Signal to Noise Ratio
TC - Transmission Convergence (sub-layer)
UAS - Unavailable Seconds

Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code. All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents

REVISION "201302200000Z" -- 20 February 2013
DESCRIPTION "Initial version, published as RFC 6767."

Short URL for this page:

Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2019
Tree display Parent OID: mib-2(1) First child OID: g9982Objects(1) First sibling OID: reserved(0) Previous sibling OID: l2L3VpnMcastMIB(245)
separation line
[webmaster] Webmaster 21 Nov 2018